Large Weathered Barnwood Aromatic cedar

$24.95

KEY SPECS

  • Size 12” x 14″                                 Color Gray/Brown
  • Material Wood                             Finish Unfinished
  • Residential Wall/Ceilings         Commercial Wall Only

Distance around room (Length) (feet):

Height (feet):

Total Area:- @ $24.95 / Sq.ft.:

Extra Boxes (Optional):

Total Boxes: (10 sq.ft. / box)
We recommend 5-10% for overage. Each Box Coverage 10 (sq.ft.)

Total Amount:




Free Sample Kit

Category:

Description

OVERVIEW

Tap into the rustic beauty of nature with our Driftwood Collection. Crafted from the reclaimed wood of long-departed Southeast Asian fishing boats, Driftwood lends a rich sense of history to any space. Mixed grain patterns, nail holes, and natural erosion give each tile it’s own distinctive set of characteristics, meaning no two pieces are ever alike. Inspired by the spirit of the sea, Driftwood is the premiere choice for designers and homeowners desiring the weathered appearance of reclaimed boat wood.

*Please note that this item is not fire rated

This is split designer tile steamed to create a unique uniform antique rustic barn wood look. This uniform color characteristic effect is seldom found but highly sought after. This steamed cedar creates this claimed
barn wood look which is rare and expensive without too industrial look. Great for accent walls, trim, beams, peninsulas, back-splashes and ceilings.

Install

SUBSTRATE
Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and
structurally sound. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the
tiling process. Plywood should be avoided, since the wood will warp with the added moisture and it will also be
less waterproof, even after tiling.
INSTALLATION
l. Using trowel, apply a thick quantity of adhesive above chalk line and using the straight edge of the trowel,
smooth across application surface to a final thickness of approximately t/a”
. (Adhesive should be applied
in small quantities so that you are able to place material before adhesive sets). Run the notched fiagged)
edge of the trowel across the adhesive to create ridges across the surface. Jt rd
2. Place initial tile with bottom edge flush with level guide, pressing firmly into adhesive. Usepih nailer to
nail tile into place so it cannot sag while adhesive dries.
3. Interlock consecutive tiles into place on wall, pressing each piece firmly against adhesive surface while
also pushing against adjoining tile to minimize any gaps.
4. Repeat step 4 across complete wall (applying additional adhesive per step 2 as needed) making sure that
each piece stays flush with level guide.
5. Repeat steps 4-5 for all consecutive rows until no additional fulItiles can be placed on wall.
6. Finishing top and/or bottom edge. Measure distance between edge and last complete row. Cut tiles to this
width (*Note, if your edges are not straight you may have to custom cut pieces to fit) and then adhere cut
tiles.
7. Finishing sides. Measure distance between tiles and edge of wall for each row. Cut individual tiles to fit
these distance and then adhere.

Details

These exclusive custom face genuine wood tiles are the highest-end
designer tile on the market.
These exquisite wood designer tile are individually crafted in American
Walnut and Aromatic Cedar. The individual pieces are split, beveled,
sanded, and applied meticulously to our patented fiberglass mesh
backing for easy installation. The 3D appearance of shakes are
unmistakable as well as the overall high-end effect is astonishing! This
3D architectural split face tile expresses the true character of these
beautiful wood grains best properties of which were hand selected for
this purpose. You are not only getting the feature and characteristics of
these beautiful woods: American Walnut, Aromatic Cedars, as well as
the 3D thickness to give you the highest-end results that no other
product offers. These create a wow factor that is unprecedented in the
industry and you will be astonished and amazed by the intricate detail
and quality of these fine wood split face architectural designer tile.
We are honored, excited and privileged to have you as a customer.

SPECIFICATIONS

Size 12″ x 14″ Color Orangish Brown
Material New Natural American Finish Unfinished
Residential Wall/Ceilings Commercial Wall Only
  • Coverage

SQ FT look 3d split wood shake
Style high end tents Finish Unfinished
Residential Wall/Ceilings Commercial Wall only
Fire Proof This product is currently not fire rated yet

CUTTING

Use a Miter compound saw/chop to cut material

 

MAINTAINANCE

  • If used in outdoor, wet areas and prevention for discoloration and natural gaining process of real woods, apply osmo wax oil to the surface every half-year
  • For Ceiling, installation consult a professional installer for proper installation!